BASSETT COMMERCIAL DUTY
TILT MODEL
SPECIFICATIONS - Tilt Option
Includes the "Safety Bar" on tilt side, the "Head Table" and the "Belly Straps".
- Inside Length = 85"
- Inside Height Clearance = 66"
- Overall Length = 102"
- Weight = 4800 lbs.
- Overall Width = 144"
- Overhead Clearance Needed = 9 1/2 ft.
- Frame: 4" x 2" x 1/4" Wall Rectangular Tubing
- Floor: 1/2" Thick Steel Slotted Floor w/Treads
- End Structure Bottom: 8" Heavy Duty Channel
- Head Gates: 2 1/2" Prime Pipe w/12 Ga. Sheeting
- Head Gate Bushings: 3" UHMW Bushing with 2" CRR Hard Machined Shaft Pivot Pin
- Center Squeeze Linkage: 2" CRR Solid Steel Shaft, with Machined Hardened Bushings, with 1/2" Thick Solid Steel Linkage Straps, with 1" x 3" Machined Bushings
- Motor: TEFC 7 1/2HP (220 Volt) Single Phase
- Side Panels: 4" x 2" x 1/4" Rectangular Tube Frame with 3" Wide Rectangular Let Downs Pivoting on 1/4" Thick Wall Tube with Auto Latches
- Side Panel Doors: Full Access on Both Sides with a 4" Rectangular Tube Frame with 12 Ga. Sheeting and 1" Diameter Hinges
- Hydraulics: Industrial Grade Valve Body Factory Set Safe Operating Pressure with Mounted Oil Filter with a C-face Mounted 9 GPM Vane Pump
- Position # 1
- Position # 2
- Position # 3
- Bottom Access Panels
- One Door Open
- Both Doors Open
"This unit is full of oil - fully tested and ready to operate - with a One Year Warranty on All Major Parts - can be customized with several additional options to suit your specific cattle handling needs - built like they always have been - as heavy as any chute on the market!"
Bassett Commercial Duty Tilt Model Positions
Bassett Commercial Duty Tilt Model Bottom Access
